Squonking enclosure

Not sure if this has been asked before. I couldn’t find anything. If there is…mods, can you move it.

I have never been into squonking mods or squonking but I am wanting to try my hand at building a squonk mod. I have no clue on what do use. I have some N1’s enclosure mods and I have a couple B enclosures. I do use lipos and have a couple smaller lipos I could use in the squonk enclosure. Just need to be pointed in the right direction as far as enclosures to use. Thanks guys!

Sent from…

<a href="https://www.e-cigarette-forum.com/threads/squonking-enclosure.837123/”>Squonking enclosure

D1 sub-ohm tank

Hello everyone. I have a D1 sub-ohm tank made by UWELL. This tank is marketed as a leak proof tank. It is designed with a bottom cup to collect condensation and e-juice. Does anyone have or use this tank? Mt tank does not leak in the "normal" sense of the word leak. However, when condensation and e-juice collect in the cup on the bottom of the tank it seeps out around the firing pin. Is this normal for this type of tank? Is there something wrong with my tank? Also, will this seepage…

<a href="https://www.e-cigarette-forum.com/threads/d1-sub-ohm-tank.837067/”>D1 sub-ohm tank

Mosfet Rating Clarification

Hi all

I have, so far, been bulding mods using a mosfet and a resistor as this seems the safest way to use a non mechanical switch on a mechanical mod. I have been using a 3034 195amp 40v mosfet and a15kamp 1v resistor. I've had good results on a series 18650 box drawing around 20 amps.

I now want to build a parallel box where I may be drawing more like 30 or 40 amps, or even a triple box where I could be drawing even more (you do the math lol). Simple I thought. However somebody on…

<a href="https://www.e-cigarette-forum.com/threads/mosfet-rating-clarification.834033/” target=”_blank” rel=”nofollow”>Mosfet Rating Clarification